353 nd datasheet

Wear protective clothing as described in Section 8 of this material safety data sheet. Environmental Precautions Do not discharge into drains, water courses or onto the ground. Avoid release to the environment. Spill Clean Up Methods Absorb in vermiculite, dry sand or earth and place intocontainers. Wash thoroughly after dealing with a spillage.

ÅngströmBond® EPO-TEK® 353ND is a two component, 100% solids, heat curing epoxy designed for high temperature applications. Although it will perform continuously at 200°C, it will also tolerate +300-400°C for several hours.

Storing Receiving • ·Upon receipt of the material, review the Technical Data Sheet for specific product information (attached to the packing slip). • Read and follow the MSDS to insure proper chemical hygiene (safety precautions) of the EPO-TEK material (also attached to packing slip).

EPO-TEK® 353ND Black Technical Data Sheet For Reference Only High Temperature Epoxy Epoxies and Adhesives for Demanding Applications™ This information is based on data and tests believed to be accurate. LF353 JFET-INPUT DUAL OPERATIONAL AMPLIFIER SLOS012B – MARCH 1987 – REVISED AUGUST 1994 2 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 recommended operating conditions MIN MAX UNIT Supply voltage, VCC + 3.5 18 V Supply voltage, V CC – –3.5 –18 V electrical characteristics over operating free-air temperature range, VCC± = ±15 V (unless